Tag Archives: Solar canopy

High school students to solarize the city of Lowell — virtually

In April, high school students in Lowell, Massachusetts will start exploring various solarization possibilities in the city of Lowell -- famously known as the Cradle of American Industrial Revolution. Many municipal properties and apartment buildings in Lowell have large roofs that are ideal for rooftop solar installations. Public parking facilities also provide space for installing solar canopies, which serve the dual purpose of generating clean energy and providing shade for parked cars. Students will discover the solar potential of their city and calculate the amount of electricity that can generated based on it.

This project is made possible by our Energy3D software, which supports engineering-grade solar design, simulation, and analysis. The Lowell High School, local business owners, and town officials have been very supportive about this initiative. They provided a number of public and private sites for students to pick and choose. Some of them have even agreed to serve as the "clients" for students to provide specifications, inputs, and feedback to students while they are carrying out this engineering project.

Among the available sites, five public parking garages managed by the municipal authority, which have not installed solar canopies, will be investigated by students through feasibility studies that include 3D modeling, solar energy simulation, and financial planning. Through the project work, students will author reports addressed to the property owners, in which they will recommend appropriate solar solutions and financial options.

Solving real-world problems like these creates a meaningful and compelling context and pathway for students to learn science and engineering knowledge and skills. Hopefully, their work will also help inform the general public about the solar potential of their city and the possibility of transitioning it to 100% renewable energy in the foreseeable future, which is a goal recently set by Massachusetts lawmakers.

Accelerating solar farm design in Energy3D with a new model of solar panel racks

Fig. 1: A solar farm of 5,672 solar panels on 8/16 in Boston
The solar simulation in Energy3D is based on discretizing a solar panel, a reflector, a solar water heater, a window, or any other surface into many small cells (mesh), calculating the solar radiation to the centers of the cells, and then summing the results up to obtain the total energy output. For example, a photovoltaic solar panel can be divided into 6x10 cells (this is also because many residential versions of solar panels are actually designed to have 6x10 solar cells). The simulation runs speedily when we have only a few dozen solar panels such is in the case of rooftop solar systems.

Fig. 2: Simulation of 5,672 solar panels on 8/16 in Boston
Unlike rooftop solar systems, large-scale solar farms typically involve thousands of solar panels (mega utility-scale solar farms may have hundreds of thousands of solar panels). If we use the same discretization method for each panel, the simulation would run very slowly (e.g., the speed drops to 1% when the number of solar panels are 100 times more). This slowdown basically makes Energy3D impractical to use by those who cannot afford to wait such as students in the classroom who need to get the results quickly.

Fig. 3: The result of the accelerated model
Fig. 4: The result of the original model
Luckily, solar panel arrays are often installed on parallel long racks in many solar farms (Figure 1). For such solar panel arrays, a lot of calculations could be spared without compromising the overall accuracy of the simulation too much. This allows us to develop a more efficient model of numeric simulation to do solar radiation calculation and even explore methods that use non-uniform meshes to better account for areas that are more likely to be shaded, such as the lower parts of the solar panel arrays. By implementing this new model, we have succeeded in speeding up the calculation dramatically. For example, the daily solar simulation of a solar farm consisting of more than 5,000 solar panels took about a second on my Surface Book computer (Figure 2 -- in this scene I deliberately added a couple of trees so that you can see the result of shading). With the previous model I would probably have to wait for hours to see the result and the graphics card of my computer would take a very deep breath to render more than 5,000 dynamic textures. This is a huge improvement.

Figures 3 and 4 show a comparison of the simulation results between the new and old models. Quantitatively, the total output of the new model is 93.63 kWh for the selected day of June 22 in Boston, compared with 93.25 kWh from the original model. Qualitatively, the color shading patterns that represent the distribution of solar radiation in the two cases are also similar.

The new rack model supports everything about solar panels. It has a smart user interface that allows the user to draw racks of any size and in any direction -- it automatically trims off any extra length so that you will never see a partial solar panel on a rack. When tracking systems are used with long, linear racks, there is only one way to do it -- horizontal single-axis tracker (HSAT). The new model can handle HSAT with the same degree of speed-up. For other trackers such as the vertical single-axis tracker (VSAT) or the altazimuth dual-axis trackers (AADAT), the speed-up will not be as significant, however, as the inter-rack shading is more dynamically complex and each rack must be treated independently.

Designing solar farms and solar canopies with Energy3D

Fig. 1: Single rack
Many solar facilities use racking systems to hold and move arrays of solar panels. Support of racks is now available in our Energy3D software. This new feature allows users to design many different kinds of solar farm, solar park, and solar canopy, ranging from small scale (a few dozen) to large scale (a few thousand).

Fig. 2: Multiple racks
Mini solar stations often use a single rack to hold an array of solar panels (Figure 1). This may be the best option when we cannot install solar panels on the building's roof. You probably have seen this kind of setup at some nature centers where the buildings are often shadowed by surrounding trees.

If you have more space, you probably can install multiple racks (Figure 2), especially when you are considering using altazimuth dual-axis solar trackers to drive them. This configuration is also seen in some large photovoltaic power stations.

Fig. 3: Rack arrays
Larger solar farms typically use arrays of long racks (Figure 3). Each rack can be driven by a horizontal single-axis tracker. Using taller racks usually requires larger inter-rack spacing, which may be an advantage as it allows maintenance trucks to drive through. In a recent experiment, SunPower experimented with how to grow crops or raise animals in the inter-rack space with their Oasis 3.0 system. So arrays of taller racks may be desirable if you want to combine green energy with green agriculture.

Fig. 4: Solar canopy above a parking lot
If you raise the height of a rack, it becomes a so-called solar canopy that provides shading for human activities like the green canopies of trees do. The most common type of solar canopy converts parking lots into power stations and provides shelters from the sun for cars in the summer (Figure 4).

Designing solar canopies for schools' parking lots may be a great engineering project for students to undertake. This is being integrated into our Solarize Your School Project. In fact, Figure 4  shows a real project in Natick High School in Massachusetts. The hypothetical design has more than 1,500 solar panels (each of them has the size of 0.99 x 1.96 m) and costs over a million dollars.